5
Locate a landing gear rod, a PU tire, a screw and a
wheel housing.
Use a M2.5*12mm screw to secure the landing gear
rod, the tire and the wheel housing together.
Install the landing gear on the fuselage with a
M2.5*12 screw.
KIT version only:
Secure the control horn on the
aileron with three screws.
Insert Z-bend wire into the hole of control horn
adjuster. Secure the adjuster to the control horn on
the aileron with a M2*10 screw and M2 nut. Connect
Z-bend wire to the servo on the aileron.
Use the Y-harness to connect the wing servo wires.
