Elite Greenhouses 8'5" Wide Thyme, Instructions & Illustations

Page: 9 / 40

If you have the built in base model, then the side cill above is replaced by a side
built in base section.
BUILT IN BASE MODEL ONLY
If your greenhouse is over 12’5” in length, you will need to attach the side built in base sections to-
gether to form the length of your greenhouse. You will notice that you have 4 side built in base
pieces, 2 of which will be un-fabricated at 1 end. These 2 sections are handed sections and must be
fitted to the correct side assembly.
The un-fabricated end of the base will be joined to the unhanded base section as shown below. It is
essential that the un-fabricated end is towards the middle of the greenhouse side assembly and not at
one of the ends.
To attach the 2 built in base pieces together you must attach 2 base legs back to back, bolt them to-
gether and attach the vacant end of each base leg to the bolt channel of the base section as shown.
Your gutter and ridge section will be in one piece and will not need to be joined (except where
greenhouse is over 20’5”- see supplementary instructions related to greenhouse extensions).
BUILT IN BASE