Base Frame and Handlebar Assembly
Parts Needed
STEP 1- Base Frame
Unpack Base frame from Carton.
Attach the Bottom Front Tube(1)
to the Front Baseframe(9) using
2-Bolts(32). Insert two Base
Frame End Caps (31) into the
Bottom Front Tube (1).
Attach the Bottom Rear Tube(53)
to the Front Baseframe(9) using
2-Bolts(54). Insert two Bottom
Rear Tube End Caps (55)
into the Bottom Rear Tube (53).
Attach the Cross Bar(12) to the
5
Step 2- Installing Handlebars
Note:
Handlebar
Right (6)
Attach the Cross Bar(12) to the
Front Baseframe(9) using
4-Bolts(20) and 2-Metal Support
Plate(41),4-Flat Washers(19) and
4-Nuts(21).
Unfold Base frame- Front ( 9) from
Base frame-Rear (8),
Insert Ball Pin (26) through right
side hole between the 2 frames.
Summary of Contents for ITM 4600-E
Page 4: ...Exploded View 4 ...
