Elite Fitness FALCON, Assembly Manual, Page: 12 / 32

12
STEP 7
Now the equipment is completely assembled, if you find that the bike isn’t stable on the
floor, you can use the adjusting pads (20) on the stabilisers.
You can adjust the resistance by turning around the brake knob (72) and press down the
brake knob (72) to stop for an emergency.
You can adjust the height of the seat (1) and handlebar (63) by releasing the knob (8) and
(65) and align holes for your desired height. You can then tighten it properly, but do not
exceed the mark “stop”.
The seat also can be slid back and forth and fixed by the knob (5).
63
65
20
8
6
5
1
72