Elite Acoustics Engineering A6-55 Quick Start Manual Download Page 12

SYSTEM SPECIFICATIONS

Speakers:  

 

Woofer =  2 x 5 1/4” 

 

Tweeter = 2 x 1” Silk-Dome

 

Optimized front ports for extended low-frequency response

 

Frequency response 70Hz - 20k Hz

 

Cabinet: 

MDF or Plywood.

Amplifier: 

 

High-Efficiency Class D 100 Watt

EQ Controls: 

 

Low 

+/- 12dB @ 50Hz (shelving)

 

Mid 

+/- 12dB @ 200Hz – 4k Hz (resonant)

 

High 

+/- 12dB @ 10k Hz (shelving)

 

Notch 

+/- 12dB @ 80Hz – 400 Hz (high-Q resonant)

Battery:

 

Built-in Lithium Iron Phosphate (LifePO4), rechargeable [12V, 11,000mAh]

 

Typical recharge time ~ 6 hours

 

Play time ~ 6 to 8 hours

Power Supply:

 

DC 12V, 5000 mA

Physical:

 

Dimensions: 15.3”W x 13.9”H x 9”D

 

Weight: 28 lbs

• 

• 

Nominal output level (1 kHz): 

Right Channel Link out: -10 dBu Main/Direct Output: +4dBu

• 

Channel controls: CH1 & 2:

 EFX Send Level knob, Gain knob, Mute switch, Phase, Pad 

Notch Filter,Frequency, & EQ(Channel 1 EQ includes Mid Frequency) 

CH3/4: 

Level Knob & 

EFX Send Level

• 

EFX Effect controls: 

Dry/Wet knob, Decay/Rate knob, 16 different effects(Bright/Dark 

Cavern, Bright/Dark Hall, Bright/Dark Room, Bright/Dark Plate, Ambience1, Ambience2, 

Echo, Repeat Echo, Echo/Rev1, Echo/Rev2, Chorus, Flange)

• 

Master controls:

 Volume Knob, Mono Switch, Equalizer (Low, Mid, High knob), Effect Mix, 

Decay/Rate, Effects

• 

Stereo Inputs: 

1/4” Left/Right input jacks

• 

Phantom Power: 

+48V

• 

Aux in control: 

Level knob

• 

Indicators: 

signal clip, power, +48V, EFX Bypass, Bluetooth

®

• 

Connectors: CH1 & 2: 

Input jacks (XLR type, 1/4” TRS phono type), 

CH3/4:

 Left/Right 

stereo input (1/4” TRS phono type), AUX in: input jacks (1/8” jack), Right channel output: line 

out jack Right (XLR type), DC in jack

• 

Power Switch

• 

Other features: 

 

Playback from Bluetooth device

 

Optimized front ports for extended low-frequency response

 

Rechargeable Battery can be recharged from Car battery when using DC car  

 

 

adaptor cord that is included

 

Built-in pole-mount, 35mm receptacle on bottom of unit

• 

Accessories: 

AC cord, AC adaptor, DC cord for the car, Owner’s manual

Summary of Contents for A6-55














Reviews: