BLUETOOTH® FUNCTION
•
To turn ON/OFF Bluetooth® function
PRESS/HOLD down MODE button for approximately 5 seconds
Both LEDs will flash at the simultaneously
•
To pair device to the speaker system
Bluetooth® needs to be turned ON
QUICK TAP the MODE button once
Both Flashing LED: indicate Bluetooth
®
is ready to be paired
Flashing Blue LED only: indicate Bluetooth
®
is connected
Extend the Bluetooth Antenna to increase range for Bluetooth.
Metering
Chan 1 Signal, Clip and Mute LED
Chan 2 Signal, Clip and Mute LED
Chan 3 Signal and Clipping LED
Use Signal and Clip LEDs to monitor the input signals to help
prevent distortion.
Effects Controls
Effects Mix [8]: Amount of effect being applied to Input, Dry and Wet mix. There is no
EFX if knob is completely on DRY position.
Rate/Decay [9]: Controls the duration of the effect
Effects Knob Selector [10]: Select effect of choice
