6
D. If the unit is not stable, pull out the appliance and repeat the previous step until the unit is stable.
Note:
If the unit is relocated, the bracket must be removed and installed in the new location.
Initial Setup
• Before connecting the wine cellar to the power source, let it stand upright for approximately
24 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
• Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate before making any adjustments.
Temperature Adjustment
• When the wine cellar is plugged in for the first time, the LED display will show the factory
preset temperature of 61°F.
• The wine cellar can be set to any temperature between 41° and 68°F to accommodate your
wine storage requirements. To set the temperature, press the up or down arrow button to
increase or decrease the temperature setting until the desired temperature is attained. It may
take some time to reach the set temperature.
Push the appliance into its place of installation.
Summary of Contents for DWCDR6681-24S
Page 16: ...1 Wire diagram ...