12
CPS2011V
GB
DESCRIPTION OF COMPONENTS
1. LID
2. BOWL
3. BASE
4. START SWITCH (ON/OFF)
5. RUBBER PLINTH
BEFORE USE
• Clean the bowl and blade in warm water before using the appliance for the first time.
• Make sure (before each use) that the potato peeler is positioned on a clean, dry
surface and that it stands steady on the rubber plinth.
• Make sure that the appliance is switched off before inserting the plug into the wall
socket.
• Position the bowl correctly on the base and fit the blade on the shaft (make sure that
both the bowl and blade are properly centred).
USING THE POTATO PEELER
1. Make sure the start switch is in the OFF position.
2. Make sure that all components are correctly positioned (if they are not, the appliance
will not work).
3. Fill the container with 450 ml of water or up to the selection line and then add potatoes
until the blade is covered (never more than 1 kg). Make sure the lid is properly closed.
4. Turn the start switch to the ON position to start the appliance (it will start to vibrate but
will remain stable thanks to the rubber plinth).
5. It takes around two minutes for the potato peeler to peel the potatoes (you can see
through the lid how peeling is progressing). It may take a little longer to peel potatoes of
irregular shape, but do not run the potato peeler for more than four minutes. Once the
potatoes are fully peeled, turn off the potato peeler with the start switch (OFF), unplug
the power cord, remove the lid and take out the potatoes.
6. Wash the potatoes in tap water and remove any residual peel with a knife or
hand-held potato peeler.
