Elipson ALPHA 100 RIAA, Manual

Page: 31 / 40

31
IMPORTANT : SET YOUR AMPLIFIER ON A MODERATE VOLUME BEFORE PUTTING DOWN THE CARTRIDGE
ON THE DISC TO AVOID ANY DAMAGE TO YOUR SYSTEM.
• Select speed according to the chosen disc (33 or 45 rpm).
• Start playing.
VI. OPERATING
NOTES
closer to the turntable.
hard drive access...) at the same time they broadcast audio.
• Static electricity can disrupt the Bluetooth signal.
If you have trouble pairing, check that there is no other device connected via Bluetooth. If
there is still trouble, you may need to reset the memory of the turntable.
The turntable’s blue LED turns off.
Pairing memory is now erased.
If you still have trouble pairing despite these manipulations, press the pairing button during 3
seconds to turn off the Bluetooth. Press again on the pairing button during 3 seconds to turn
it on.
(after a delay of about 25sec).