www.elinz.com.au / [email protected] / 1300 881 773
E. Install the filter in correct direction, make
the buckles in right place and twist to fix it.
F. Install the main body. Put the hook into
the hole, push the rear part and stop until
hearing the sound of locking.
Ensure the appliance is disconnected from the charger before removing the brush roller. Be careful not
to pull the ON trigger.
(1)
Twist the button counterclockwise and pull out the brush roller.
(2)
Tilt and shake to pour out the roller, use the brush cleaning tool to sweep away the trash on the
roller.
(3)
The brush roller is washable. Before replacing, check that the brush roller is completely dry.
(4)
Push in and twist the button clockwise to install the brush roller.
6. Troubleshooting
Common trouble possible causes and solutions
Main unit not working
Low battery power
Charge the unit before use
Suction inlet blocked
Remove blockage in suction inlet
Weak suction
Dust bin or filters blocked
with dust
Remove the dust inside the bin or
filters
Rolling brushed is jammed
with hair or long straps
Remove hair or long straps from
rolling brush
