www.elinz.com.au / [email protected] / 1300 881 773 www.elinz.com.au / [email protected] / 1300 881 773
Step 7. Wait for the connection to be completed.
Is App required?
An OBD-II App is required to work with the adapter and the functions you
can get mainly depend on the app you use. It may require separate
purchase.
Can i leave the scanner plugged in all the time?
Because OBD-II port is always powered, the scanner will have power
consumption when vehicle is turned off. Therefore, we suggest you
remove it from the OBD port if it is not in use. In addition, for long session
of use (especially on vehicles with old battery), start the vehicle.
OBDII is not showing up on my phones Bluetooth list.
Check the device if it is plugged in; Check if the unit gets warm after being
plugged in. You can also try with another vehicle to verify.
App not connecting to the OBD-II Adapter.
Check the app compatibility first. Then make sure "OBDII" is connected
with your phone and you have made the required app connection setting.
Cannot connect to vehicle.
Verify if your vehicle is OBD-II compliant. Make sure the ignition key is in
ON position or start the vehicle to try. Then try it on another vehicle.
Can it read my ABS, airbag and other non-check engine lights?
It cannot read ABS, SRS Airbag, Stabilitrak, and other non-check engine
light error. In order to read these codes, you will need special vehicle
specific scanner or visit your dealership.
