9.
From the cable
side
N
⑤
④
①
②
③
Green/Red: N gear
Pink: 1 gear
Blue/Red: 2 gear
Green/Black: 3 gear
Yellow/Red: 4 gear
Yellow/White: 5 gear
10.
4 round head
Gray: 6 gear, negative control, LCD display
Brown red: engine fault light, negative control, yellow
light
11.
③
②
①
①Black/white: sensor signal
②Green: sensor negative
③Red/white: sensor positive
Background parameter settings
Press and hold the top
“
sel
”
key, then turn on the ignition switch. After 5 seconds, it will enter the settings, divided into six pages.
Page 1: Setting of tyre circumference
C-1850 means the default tyre circumference is 1850 mm. Short presses of the top
“
sel
”
button changes each digit. Press the bottom
“
set
”
button to move to the next digit. The circumference can be set from 500 to 2600 mm. Press the top
“
sel
”
key for 3 seconds to save the
circumference and enter the next page.
Page 2: Magnets Number Setting
C
–
02 means there are two magnets, 1 - 12 can be set. Short presses of the top
“
sel
”
button changes each digit.
Press the top
“
sel
”
key for 3 seconds to save the number of magnets and enter the next page.
Page 3: Speed setting interface
C-2, 2 indicates that the engine is 2 cylinders. (166HZ) Switch 2/4 cylinders by pressing the top
“
sel
”
key. Press the button for 3 seconds to save
it into the two-wire and three-wire fuel setting interface. ,
Page 4: Fuel setting of two lines and three lines (two lines and three lines should be set in the general term of upper computer)
The 188 first 8-word speed display shows 4, the total cumulative display E-3, 3 for the three-line oil meter, 3 for the three-line display E-3, 2 for
the two-line display E-2, and 3/2 for the switch by pressing the button. Press the button for 3 seconds to save and enter the accumulated clearing
interface.
Page 5: Changing the speed between mph and kmh
Short presses of the top
“
sel
”
button changes between mph and kph.
Press the top
“
sel
”
key for 3 seconds to save the speed setting and enter the next page.
Page 6: Resetting the total mileage.
The total mileage can be reset to zero in this page.