Operation Manual of P T Z Dome Camera
18
[3].Joystick Up/Down to select pending
operating
or
programming
Pattern(number range:1
～
3).
[4].Joystick Up/Down to move the cursor
to select Program a Pattern.
[5].Press OPEN to enter recording of the
manual running trace.as left Fig 1.
[6].Press CLOSE to finalize the
selection. as left Fig 2.
[7].Joystick Up/Down to move the cursor
to select NAME.
[8].Edit name (Please refer to name
setting section of preset position)
PATTERN
1 NUMBER 1
2 PROGRAM A PATTERN
3 RUN A PATTERN
4 DELETE A PATTERN
5 NAME ______
6 NAME DISPLAY OFF
IRIS OPEN TO BEGIN
IRIS CLOSE WHEN DONE
Fig 1
Fig 2
[9]. Joystick Up/Down to move the cursor to select Name Display.
RUN A PATTERN
Running Pattern Tracking Operation Steps:
[1].Select pending running Pattern trace from NUMBER.
[2].Joystick Up/Down to select Run a Pattern.
[3].Joystick Left/Right or press OPEN to run the trace of selected Pattern.
DELETE A PATTERN
Delete Pattern Operation Steps:
[1].Select pending Delete Pattern trace from NUMBER.
[2].Joystick Up/Down to select Delete a Pattern.
[3].Joystick Left/Right or press OPEN to enter and Click OPEN to delete
the trace of selected Pattern as below Fig 3
～
Fig 4
