8. Monitor Parameter Setting
8.1 How to enter the installation setting page
Language >
User Setup >
About >
1.Select About item on
setup page,press
MENU
Button to confirm
2.Press UNLOCK button
and hold for 3s.
3.Use
▲ / ▼
Button to increase /
decrease the value; use
Button
to select last/next digital. After
inputing,press MENU Button to
confirm
Exit
About
H/W : a1.2
S/W : V01.01.01
Addr : 00.00
Video STD : AUTO
Exit
Installer Setup
[
0
000 ]
A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor
answers the call, conversation with the guard person is started..
The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is
used to cancel this function.
8.2 How to set the monitor as a Guard Monitor
8.3 How to set the slave monitor address
Maximum 4 monitors can be connected in one apartment,one master monitor together
with 3 slave monitors, so you should set the address correctly.(note:must have one
monitor to be set as master monitor)
The code of 8000 is used to set the master monitor.
The code of 8001 is used to set the first slave monitor .
The code of 8002 is used to set the second slave monitor .
The code of 8003 is used to set the third slave monitor .
8.4 How to set the monitor panel on
In default mode,when receive a calling,the master and slave monitors will ring at the same
time,and just the master monitor can display the image while the slave monitors can not.
But the settings can be changed,you can set the master monitor and all the slave monitors
to panel on at the same time when receiving a call, just input the code number of 8006 on
each slave monitor.
6
