Eliet C550 ZR, Manual

Page: 34 / 64

34
English
forget to switch it back on afterwards.
Neither ELIET, nor the engine manufacturer, shall accept warranty claims based on a lack of oil in
the machine.
If slopes are a recurring factor in a particular area, adding 0.2 litres of extra oil to the tank will
resolve the problem.
d. Overload
By impacting a foreign object in the ground (e.g. tree root), the blades can get stuck on it and the
engine can block. Even an excessively large object that gets into the discharge and blocks it will
cause the engine to cut out. Check the housing and discharge system for foreign objects.
e. Technical defect
If neither of the aforementioned checks identifies the cause, the problem could be more
technical in nature. A defect in the engine or a problem with the carburettor could be the issue.
For assistance with these problems, please visit your authorised ELIET dealer or an authorised
service centre for the engine brand.
9.10.3. A trail of damage to the lawn
An abnormal trail of damage to the lawn may be detected on a strip while dethatching. This could
have the following causes:
• Since the blades do the ground work, they should be the first to be examined. An obstacle
under the surface may have caused a deformation of one or more blades, resulting in broad
unaesthetic cuts. (read § 11.5.9; page 51)
• It is possible that an object has become wrapped around the blade axle and causes a damage
trail apart from the blades themselves.