ELICA LI3FBA Stratus, Use, Care And Installation Manual

Page: 8 / 44

8
Installation
Installation - Ducting version
• Install the integral blower spring clip (for integral blower
installation only):
Insert the spring clip from the top outside of the hood
and fix it with 2 screws.
Note: Insert the spring clip on the slot located close to
the integral blower fixing nut.
• Install transition onto top of hood:
Important: remove shipping tape from damper and
check that damper moves freely.
Place the transition over the exhaust hole of the hood
and secure with 4 screws.
Tape to seal connection and check that damper moves
freely.
• Cut a hole in the bottom of the cabinet in order to settle
the hood.
IMPORTANT- Cabinet must be capable of supporting
100 lbs.
• Adjust the position of the clasping side spring by means
of the proper screw, according to the thickness of the
panel to which it is going to be anchored.
• Insert the hood in the cabinet and lock it by means of the
side spring.
WARNING: 2 people are required to lift and position the
hood onto the mounting screws.
• Use the holes in the casing of the hood to attach it using
8 mounting screws.