11
5 Place clip nuts over the top of the shell on the right slots
6 Replace the 4 - 6.5 x 3.5 mm top plate screws and the top
shell plate.
A
B
B
A. Top plate
B. 4 screws
7 Align mounting holes in motor mounting plate with motor
mounting clip nuts and install 5 - 6 x 16 mm screws and clip
nuts.
A
B
C
A. Screw with lock washer
B. Mounting hole in motor mounting plate
C. Clip nut
8 Attach power cord connector from the range hood to
connector on wiring box.
B
A
A. Wiring box connector
B. Power supply connector from range hood
9 Replace side covers with the previously removed screws
and with 6 - 4.2 x 8 mm screws from the hardware bag for
each cover and tighten.
10 Replace the 6 screws previously retired and place the
additional 10 - 4.2 x 8 mm screws contained on the
hardware bag to the back cover of the shell.
Summary of Contents for KIT0179549
Page 44: ......
