12
17.
Insert the cover between the support cables, making
sure they enter the special slots on the cover.
Important!
Leave enough cable so that it passes easily
through the slot obtained in the cover.
Secure the cover with 3 grub screws already screwed on
the support bracket.
Note:
The 3 fixing screws secure the cover by virtue of
the friction they exert on the cover itself, and therefore
must not be completely tightened.
18.
Check all light bulbs to make sure they are secure in
their sockets.
Turn power (On) in service panel.
Check lights and blower operation.
If range hood does not operate:
• Check that the circuit breaker is not tripped or the house
fuse blown.
• Disconnect power supply. Check that wiring is correct.
To get the most efficient use from your new range hood,
read the “Use and Care Information” section.
Keep your Installation Instructions and Use and Care
Guide close to range hood for easy reference.
