5
LIST OF MATERIALS
Removing the packaging.
I
CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
I
WARNING
Remove the protective film covering the product before put-
ting into operation.
Supplied Part
Pieces
Supplied Part
Pieces
Hood assembly with blower and
LED lamps already installed
1
Side spacers
2
5x45 mm
4
10” round air transition
1
4x8 mm
10
Parts no supplied
Tools/Materials required
• Level
• Drill
• 1¼” (3 cm) drill bit
• ⅛” (3 mm) drill bit
• Pencil
• Wire stripper or knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdriver
Parts needed
• Home power supply cable
• 1 - ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT
# Part
ETR634SS
EAR634SS
in Line Blower
1200 Kit
KIT0154387
KIT0154387
External Blower
1200 Kit
KIT0153054
KIT0153054
Grease Filters Re-
placement Kit
GF09GA
