17
Operation
Use the high suction speed in cases of concentrated kitchen
vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in
operation during cooking and for another 15 minutes
approximately after terminating cooking.
1 = ON/OFF – Speed increase
2 = Lights ON/OFF
3 = Selection of the desired function
4 = Setting the function in use
5 = The display shows:
a –
list of available functions
b –
indicator of the function currently in use
c –
indicator of the speed in use
d –
clock / data related to the function in use
e –
saturation of the anti-grease filter
f –
saturation of the carbon anti-odour filter
Available functions
SPEED
Switch on/Speed increase:
- press button
1
to switch on the hood
- press button
1
to go to the next speeds, until the hood is
switched off
The extraction speed is shown on the display (c), in the
following manner:
1st speed
performance 40%
***
2nd speed
performance 60%
***
3rd speed
performance 80%
***
high speed
performance
100% ***
OFF
*** the percentage displayed refers to the indicative value of the
performance
The high speed is timed for 10 minutes; to interrupt the timing
and switch off the hood press button
1
.
NB=
the speed might increase automatically during use, this is
because the control is fitted with a system that protects the
display in case of overtemperatures.
CLOCK
To set the clock:
- press button
3
until moving the indicator(b) on function
“CLOCK”
- press button
4
to access clock setting
- keep button
4 pressed:
•
keeping it pressed for one second increases the time by
one minute
•
after 10 seconds, each second it is pressed increases the
time by 10 minutes
To store the set time:
- press button
3
TIMER
Stopwatch Function
- press button
3
until moving the indicator(b) on the “TIMER”
function
- press button
4
to access timer setting
-
to start the stopwatch:
simultaneously press button
3
and
button
4
, for 5 seconds
-
to stop the stopwatch:
simultaneously press button
3
and
button
4
, for 5 seconds
Note=
after 60 minutes the stopwatch stops automatically
“Countdown” Function
- press button
3
until moving the indicator(b) on the “TIMER”
function
- press button
4
to access timer setting
To set the “Countdown” timer:
- keep button
4 pressed:
•
keeping it pressed for one second increases the timer by
one minute
•
after 10 seconds, each second it is pressed increases the
timer by 5 minutes
To save the “Countdown” timer
- press button
3
The Timer indicator(b) will start flashing to indicate the
start of the “Countdown”
When the “Countdown” reaches “0:00” the motor is
switched off
Note =
to set a new timer, button
4
must be pressed until the
indication “0:00” is displayed again
Note =
the maximum countdown setting time is 60 minutes
