Version: 7. Oktober 2018 12:40
Page 11 of 25
3.0 Software
The software on the controller enables the user to change all relevant settings and adjust the system
to local needs for example during commissioning.
The HYBRID BASIC controller has an integrated menu which can be selected by pressing the OK
button. When the menu is active, the outputs are disabled and no control is possible. After leaving
the menu, the new settings will be stored in EEPROM and the controller automatically loads the new
parameters and start working.
When the system is working, you can read the actual power on the top display. The bottom display
shows error or other parameters, depending on the firmware version and type of HYBRID controller.
Availability of the settings and display screen depends on the firmware version.
3.1 Settings reading
To read out the actual parameters of the HYBRID BASIC controller press the OK button. The led will
start flashing green and by pressing UP and DOWN you can scroll through the parameters.
On the top screen you can read the parameter number and on the bottom screen you can read the
actual parameter value.
+
-
OK
LED solid green
3.2 Settings changing
You can change the settings by pressing the OK button when the parameter which needs to be
changed is selected and displayed on the screen.
+
-
OK
LED solid orange
The led will lid orange to indicate that the parameter can be changed.