- 24 -
Installation and First Start-Up
LIMAX S-RMS-H: Mounting kit for the fixation on the rail with tension springs
NOTE!
Other types of mounting for the magnetic tape used for the LIMAX
series such as mounting the tape with dowel and tension spring on the
shaft ceiling are not certified and must not be used!
Further information on the ELGO mounting kits can be found in the chapter Accessories on page 52.
8.3.2.1
Mounting of the Tape along the Guiding Rail with Tension Weight
The magnetic tape is attached with a mounting kit at the top and the bottom of the shaft on a guiding rail. The
lower tape fixation prevents the tape from swing back and forth in the shaft and for mounting the presence de-
tector.
