20
Warning:
When the machine is on the platform do not pull any levers except the drive lever
6. Load the machine on a vehicle properly and ensure its secured
7. Turn off the engine.
8. After loading, put blocks under tracks and attached machine using transport belts
5.8.
Equipment changing
Warning:
When striking the pins, there can break the metal debris and injured eyes
Always wear goggles, helmet and gloves.
1. Place the machine on a flat, sturdy and level ground.
2. Lower the light fixture to touch the ground.
3. Stop the engine.
4. Remove the bolts securing the mounting equipment to the jib and the jib cylinder.
5. Remove the bolts and remove the equipment.
Important:
Keep pins clean.
Warning:
Do not put your fingers into the holes in order to verify their concentricity, it can lead
to serious accident.
6. Set the jib that the mounting holes are concentrically positioned fixture with jib holes / arm and
the hydraulic cylinder.
7.Lubricate the inner surface
8. Put pins
9. Tighten the screw bolts.
