24
PIC 5.9.2
5.9.3 Operation of the hydraulic hammer
1. Before start using the hydraulic hammer machine need to run for around 15 minutes to let the
hydraulic oil takes the right temperature.
2. Hydraulic hummer need to be lubricated before and during using.
3. To start working by hammer the tip must be pressed into the breaking material and then hammers
is start running by pushing the lever (F, PIC.4.1) to the left.
4. Continuous operation of the hammer cannot be longer
than 15 seconds
, when the material does
not want to break, change the place of impact.
ALL DETAILED INFORMATION ARE INCLUDED IN HYDRAULIC HAMMER OWNERS MANUAL
6.
SERVICE
Warning:
A person who does not apply to the safety instructions and who ignore included
warnings, must be sure that its approach work is safe.
6.1.
Service position
Warning:
If you need to start working on the machine before it cools, watch for hot liquids and
bands machine, which can cause burns.
Before working by the machine:
1. Set the machine on a flat, sturdy and level ground.
2. Working system should rest on the ground.
3. Allow machine to cool
