ELGO Electronic LMIX22-007, Operating Manual

Page: 17 / 36

Installation and First Start-Up
- 17 -
7.2.1 The Magnetic Tape MB20-50-10-1(2)-R
In the standard case, the magnetic tape is delivered as described
It is installed by gluing it to the respective mounting surface.
The magnetic tape consists of 2 pre-assembled components (Figure8: Components of the magnetic tape):

A magnetized, flexible plastic tape (Pos. 3), which is connected with a magnetically conductive steel
tape as inference band (Pos. 4) and is supplied with an adhesive tape (Pos. 5).

A magnetized permeable cover tape (Pos. 1), which serves for the mechanical protection of the plastic
tape (not required for the measurement) and is supplied with an adhesive tape (Pos. 2).
Therefore a divergent tape structure and scope of delivery is also possible.
The cover tape is also available separately
Figure8: Components of the magnetic tape
7.2.2 Magnetic Tape MB20-20-10-1(2)-R-D-BK80
Figure 9: Magnetic Tape MB20-20-10-1(2)-R-D-BK80
The cover tape (C) is not included in the delivery of this version.
<SN XX/000000001/00000 MB20-20-10-1(2)-R-D-BK80 ELGO
10,00
8,00
1
,3
5
Top view:
Front view:
Scale 5:1
A
Magnetized plastic tape
(Magnetic tape)
Magnetically conductive steel band
(Interference band)
B
Pos. 1: Stainless steel cover tape
Pos. 2: Double-sided tape
Pos. 3: Magnetized plastic tape
Pos. 4: carrier tape stainless steel
Pos. 5: Double-sided tape
Pos. 6: Mounting surface, for example machine bed