13
7
Options
7.1
Structure of Magnetic tape
MB20-50-10-1-R
The tape consists of 3 components (see Figure 1), a magnetized, flexible plastic tape (Item 3), which is
connected with a steel band (Item 5) and a cover tape (item 1), which is for protection of the plastic tape.
The cover tape is needed for the mechanical protection of the magnetic tape. In addition, it protects the
magnetic tape from extreme external magnetic influences.
For the complete bonding between the different materials a special sticky tape is used (item 2, item 4, and
item 6).
Picture 1: components of magnetic tape
7.2
Handling
To avoid tension in the tape, it should not be twisted or stored with the magnetized plastic tape to the inside
minimum radius of curvature 150 mm).
magnetisiertes
Kunststoffband
Stahlband
Picture 2 Storage and Transport
Options
Pos. 1 – Cover tape
Pos. 2 – sticky tape
Pos. 3 – magnetized plastic tape
Pos. 4 – glue tape
Pos. 5 – steel band
Pos. 6 – glue tape
Sensor side
Magnetized
Plastic tape
Steel band
Summary of Contents for LMIX1 Series
Page 1: ......
