Installation and First Start-Up
- 15 -
6.7
Parameter List
Table 1: Parameter List
Parameter Function
Default Setting
Customer Setting
P01: A
System configuration:
A = 0: positive counting direction
A = 1: negative counting direction
0
P02: A
Display mode (only affects the display symbols!):
A = 0: mm mode / display symbol „ mm “
A = 1: Inch mode / display symbol „ Inch “
A = 2: mm mode / display symbol „ m “
A = 3: mm mode / display symbol „ ° “
A = 4: mm mode / no display symbol
0
P03: A
Decimal place ( 0 … 4 )
only for mm mode
2
P05: ABC Key lock:
A: „Set“ key
(0= enabled / 1= disabled)
B: „Incr/Abs“ key
(0= enabled / 1= disabled)
C: „*“ key
(0= enabled / 1= disabled)
000
P07: A
Basic resolution (only firmware V1.50 and higher):
A = 0: resolution 0.01mm
A = 1: resolution 0.1mm
0
P08
Pulse multiplication factor (0.0001 … 9.9999)
1.0000
P09:
Reference value (−9999999 … +9999999 )
0
P10:
Offset 1 (−9999999 … +9999999 )
0
P11:
Offset 2 (−9999999 … +9999999 )
0
P12:
Offset 3 (−9999999 … +9999999 )
0
P13: A
Offset Configuration (0 … 3)
A = 0: offset cannot be activated
A = 1: offset 1 can be activated
A = 2: offset 1 & 2 can be activated
A = 3: offset 1 & 2 & 3 can be activated
3
P90:
(no function)
0
P99:
Display firmware version
x.xx