Elgens LPC-2C M Series, User Manual

Page: 19 / 54

ELGENS CO., LTD. 19 LPC P-cap 2CxM Series User Manual
Chapter 3 UEFI SETUP UTILITY
This section explains how to use the UEFI SETUP UTILITY (also names BIOS) to configure your
system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI
SETUP UTILITY when you start up the computer. Please press
<F2> or <Del> during the Power-On-Self-Test (POST) to enter the UEFI SETUP UTILITY, otherwise,
POST will continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing <Ctl> +
<Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart by
turning the system off and then back on.
Entering and Control
Power on the computer and the system will start POST (Power-On Self Test) process. When the
message below appears on the screen, press <DEL> or <F2> key to enter Setup.
Press <DEL> or <F2> to enter SETUP
If the message disappears before you respond and you still wish to enter Setup, restart the
system by turning it OFF and On or pressing the RESET button. You may also restart the system
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Important
The items under each BIOS category described in this chapter are under continuous update for
better system performance. Therefore, the description may be slightly different from the latest
BIOS and should be held for reference only.
Wrong Setting values in this section may cause the system malfunctions.