At the top right corner of the Turbo.264 HD window
there is a circular gauge. It will be red, and will
point at "off", if the Turbo.264 HD hardware is not
connected. It will be black, and will point at "on", if
the Turbo.264 HD hardware is connected
How do I start encoding files?
Press the
Start
button at the bottom right corner of
the Turbo.264 HD window to start encoding. It will
take a few seconds to prepare the Turbo.264 HD
hardware, and then each file will be encoded one at
a time.
How do I stop encoding files?
Press the
Stop
button at the bottom right corner of
the Turbo.264 HD window to stop all encoding.
How do I select the encoding format for files?
After you add each file to the Turbo.264 window, you
can select an unique encoding format for that file.
The specifics of each encoding format are
discussed in the next chapter,
Encoding Formats
.
How do I find out more about the files I’ve added?
Next to each file is a small circular button with a “i”
inside. Press that to find out the location,
resolution, and other aspects of each file
Can I encode more than one file at the same time?
Add multiple files to the Turbo.264 window. By
default, each file will use the last encoding format
you've selected. You can change each file to use
an unique format, if you like. Then, press the
Start
button to begin encoding, and each file will be
encoded one at a time.
Can I encode from a video DVD?
Turbo.264 HD can accept unencrypted DVD content
that may be on your hard drive. Add an
unencrypted VIDEO_TS folder to the Turbo.264, and
then Turbo.264 HD will be able to use the video for
encoding.
Press the “
i
” button next to each DVD video file to
select the audio track, if more than one track is
available.
How can I combine multiple clips into one movie?
Multiple clips can be chained together to encode
one movie. Each clip is a chapter in the resulting
QuickTime movie.
There is a switch at the bottom of the main window
to create multiple movies or a single movie. Moving
the switch to the right will chain all of the clips
together.
When creating a single movie, the format preset
popup can be adjusted by the topmost clip only.
Turbo.264 HD Manual
8
!
Tu
rb
o.
26
4 H
D
W
in
do
w
