http://www.elfinx.com
8
Specification
Main Unit
Output Current:
Signal Lights 5A x 2, Siren 2A, Central Lock 10A
Coding:
Learning code
Voltage:
12V +/- 2V
Static Current:
<12mA (except indicator, sensor)
Indicator Current:
20mA
Shock Sensor Current:
4mA
Frequency:
433.92MHz
Remote Control
Voltage:
1.5V
Static Current:
<0.8mA
Battery:
1 x AAA 1.5V (Alkaline)
Frequency:
433.92 MHz
Trouble Shooting
The alarm keeps sounding
and cannot be stopped by the remote control.
Check the wiring connection.
Check if the fuse of the main unit is damaged.
Check if the main unit code match with the remote control code.
The alarm sounds 10 seconds after the vehicle is armed, same problem keeps happening again.
Check if the shock sensor is too sensitive.
Check if the door pin switches are damaged.
Check the wiring connection.
The alarm is easily triggered when a heavy vehicle is passing by.
Check if the shock sensor is too sensitive.
The siren does not work when the vehicle is intruded.
Check the wiring connection between alarm and main unit.
Check if the vehicle power supply is cut off.
The remote control does not work.
