Elfa CRSL606 User Manual Download Page 8

Never  wash  the  induction
cooktop with water directly to
avoid danger.

Keep electrical appliance out
of  reach  from  children  or
inform person. Do not let them
use  the  appliances  without
supervision.

Safety Reminding and Maintenance

After being used for a long
time,  the  corresponding
heating zone of the ceramic
cooktop is till hot. Never
touch the ceramic surface to
avoid burning.

If the supply cord is damaged
, it must be replaced by the
manufacturer, its service agent
or similarly qualified persons
in order to avoid a hazard.

8

Never  have  the  ceramic
cooktop to work without
food  inside,  otherwise  its
operational performance may
be affected and danger may
happen.

A dedicated power protection
air swith  protection air switch
must be incorporated in the
fixed  wiring  in  accordance
with the wiring rules.

Never use the ceramic cooktop
in high temperature
environments such as near a
gas stove or kerosene stove.

For  sealed  foods  such  as
canned goods, please do not
heat them before opening their
covers  so  as  to  avoid  any
dangers of explosion due to
heating expansion.

If the surface is cracked, swith
off the appliance to avoid the
possibility of electric shock.

Do not place rough or uneven
a p p l i a n c e s ,   w h i c h   m a y
damage the ceramic surface.

Do not put any detergents or
flammable  materials  in  the
equipment installed under the
ceramic cooktop.

Do not leave metallic objects,
such as knives, forks, spoons
and lids on the hob as they may
get hot.

Summary of Contents for CRSL606










Reviews: