9
You must cut off electrical power avoid tip-and-run hurt.
Please remove 2 fixed screws of the top shelf by Philips screwdriver and take out the shelf.
(Attention please: LED light is covered by electrical box.)
Please take out lock screw by Philips screwdriver first, then push the light cover to left, you
can take out it when light cover set out limited location. (Fig.A)
Please pull out Housing 4 from 6 of LED light board. (Fig. B)
Please take out 2pcs of screw 5 by Philips screwdriver. (Fig.C)
Please pull out LED light board 6 from light cover. (Fig.D)
Please replace new LED light according above method.
1. Inner liner 3. Lamp cover 5. Screws
2. Lock screws 4. Housing 6. LED light
Cleaning Your Wine Cooler
Turn off the power, unplug the appliance, and remove all items including shelves and rack.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your contents.
