manualshive.com logo in svg

Elfa 75-576-22, Manual, Page: 2 / 22

Share
Download
Elfa 75-576-22 Manual Download Page 2

SGX-120L User Manual, rev2.0

Page 1 of 21

http://www.seetron.com/sgxmnl.htm

2002-11-13

120x32-pixel Serial LCD Graphics Module 
(G12032)

updated Sept. 26, 2000

The G12032 Serial LCD Graphics Module receives data serially at 2400 or 9600 bits per second (bps) and 

displays text and graphics on a 120-by-32-pixel screen. The G12032 supports four font sizes; small, wide, 

tall, and large. Depending on the font size selected, the screen can be formatted as: 

l

4 lines by 20 characters 

l

4 lines by 10 characters 

l

2 lines by 20 characters 

l

2 lines by 10 characters 

Common terminal/printer control codes (such as linefeeds, carriage returns, tabs, backspace, formfeeds) 

are supported for easy formatting. Additional instructions permit backlight control, font selection, and 

cursor positioning. Graphics instructions plot points, draw lines, and display full-screen images from 

nonvolatile memory.

The G12032 (firmware version 030 or higher) has 8kB of nonvolatile EEPROM memory divided into 17 

pages of 480 bytes each. The lower two pages of this memory hold the default text font used to display 

text. The remaining memory can be used to store up to 15 full-screen images or additional fonts. A utility 

program allows you to convert and download bitmapped pictures (120x32-pixel .BMP graphics) to the 

display. 

G12864 Compatibility.

 The G12032 is very similar to the larger G12864, but there are some inevitable 

differences. If you are familiar with the G12864, check the 

comparison table

 in the specifications section 

of this document. 

Table of Contents

l

Description

 

l

Disclaimer of Liability

 

l

Warranty, Return/Repair/Replacement Policy

 

l

Contacting the Manufacturer

 

l

Quick Checkout and Demonstration

 

l

Configuring the G12032

 

l

Connecting Power

 

l

Connecting Serial Input

 

l

Display Contrast

 

l

Getting Acquainted

 

l

Text Control Codes

 

l

Graphics Instructions

 

l

Painless Graphics Primer

 

l

Creating and Downloading Bitmap Fonts and Graphics

 

l

Design Notes and Specifications

 

l

Recipes and Example Programs

 

Disclaimer of Liability

Scott Edwards Electronics, Inc. is not responsible for any special, incidental, or consequential damages 

resulting from any breach of warranty, or under any legal theory, including lost profits, downtime, goodwill, 

damage to or replacement of equipment or property, and any costs or recovering, reprogramming, or 

reproducing of data associated with the use of the hardware or software described herein.

Warranty, Return/Repair/Replacement Policy

Scott Edwards Electronics, Inc. warrants this product against defects in materials and workmanship for a 

Summary of Contents for 75-576-22























Reviews:

No comments