36
ATTENTION!
THIS OPERATION MUST BE CARRIED OUT ONLY BY
QUALIFIED PERSONNEL, AUTHORIZED TO
PERFORM GAS ADJUSTMENT WORKS.
9.1.
In order to correctly regulate the minimum flow of gas, it is necessary to:
— burn the burner;
— turn the crane to the minimum position;
— remove the knob and adjust the burner on a small stable flame with the help of
adjusting screw, located on the side of the crane rod;
— check whether the burner does not fade when the crane is rotated from its maximum
position to the minimum.
— When using liquefied petroleum gas, the adjusting screw must be twisted to
the stop.
— The main air burner does not need to be regulated.
10. INSTRUCTIONS FOR USE AND CARE OF THE HOB
10.1.
Near each control knobs the position of corresponding gas burner is indicated,
as well as the symbols of minimum and maximum flame.
Summary of Contents for ASTRA
Page 1: ...1 ...
