Rev. 062118
DiscountRamps.com
•
1-888-651-3431
Page 5
STEP 2. Crossbar Installation
① Attach Spring Washers (23),
Flat Washers (22), to M10x25
Button Head Screws (21), and
secure to upper connecting plate
(5), with M10 Nuts (24), as
shown. Do NOT tighten. Repeat
process for all four support arms.
② Support arms are now ready
for crossbar installation.
③ Slide the center channel of
the Crossbar (1), onto the M10
Nuts (24), at the top of the
support arms as shown. Only
finger tighten bolts at this stage
to allow for crossbar positioning.
④ Place the rack assembly on the truck and center the crossbar on the support arms as shown. Once all
is properly positioned, the M10x25 Button Head Screws (14), can be tightened to lock the crossbar in
place on the support arms. Repeat the same process for the rear rack assembly.
Equal overhang on both sides
Driver
Side
Passenger
Side
Summary of Contents for UPUT-RACK-ALUM-V2
Page 1: ......
