Page 1
021422
1-888-651-3431
Stainless Steel Burn Cage
Instructions for Part #BC-22-36, BC-22-48
GENERAL GUIDELINES & SAFETY
•
It is the user’s responsibility to read and follow all
instructions.
•
Keep these instructions with the product at all times and
review before each use.
•
It is the responsibility of this product’s owner to furnish the
instructions to any person that borrows or purchases the
product.
•
Inspect the product before use to ensure it is assembled
properly and all parts are in safe working order and free
of defects.
•
Never modify this product in any way.
•
All circumstances cannot be addressed in these instructions.
•
Please use common sense and practice general safety
measures when using this product.
•
Parts and/or instructions are subject to change without
notice.
•
Do not touch surfaces while hot.
•
For outdoor use only; do not use in a building, garage
or other enclosed area as toxic carbon monoxide fumes
could build up and cause asphyxiation.
•
Do not use in or on boats or recreational vehicles.
•
Do not use under or near any combustible materials,
including trees or shrubs.
•
Do not store combustible materials such as propane or
gasoline anywhere near this product.
•
Do not use on wooden decks.
•
Do not use in windy conditions.
•
Do not allow children to operate.
•
Comply with all local, state and national codes; contact
your local fire department if needed.
•
Use the same caution as with any open fire.
•
Do not leave fire unattended, especially around children
and pets
•
Do not move pit until fire, ashes and coals are completely
extinguished.
•
To avoid burns, do not touch pit until it has cooled
completely.
1. Align 2 sides to form a 90° angle,
around the edges of the base.
2. Align corners and insert pin.
3. Repeat process for all sides, creating
a square.
4. Place the top on the burn cage when
burning to prevent embers from
escaping.
PIN X4
TOP X1
SIDE X4
BASE X1
