Elettrotest TPS/M/D, User Manual

Page: 7 / 42

7
USER MANUAL TPS/M 62000595 REV 03_ – 01/06/2021
1. INTRODUCTION
TPS is a power source that supplies sinusoidal stable voltage. Its output voltage is adjustable in
frequency, amplitude and phase.
It also has the ability to generate very precise and stabilized DC voltage.
1.1. MAIN FEATURES
1.1.1. Output voltage
The output voltage is guaranteed perfectly DC or sinusoidal, with a distortion of less than 0.3%
regardless of the load. The value of output voltage is kept perfectly stable within 0.1% with linear
load and a full load.
The load that TPS is able to drive can vary from a pure capacity to a pure inductance.
The output voltage is adjustable with continuity from zero to full scale.
TPS can in fact provide the nominal power at various full scales and this allows the TPS to adapt
himself to the disparate needs of the user, without having heavy limitations on the output current.
Furthermore TPS is capable to keep the voltage stable also with time variable loads, as for
example the pulsating loads. In fact TPS recovers the distortion of the waveform within 0.3 % with
linear load and the amplitude of the voltage within 0.1% in less than half period.
Furthermore, TPS can bear a short circuit for an indefinite time without suffering any
consequence.
1.1.2. Output frequency
In AC configuration TPS allows the regulation of the output frequency from 10 to 80Hz at
maximum voltage.
This output frequency can be regulated with continuity within the above mentioned range of
frequencies and it has a stability of 0.01% with respect to the set frequency.