ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 8 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 8 of 102
3.4 Conservation of the manual
3.4.1 How to conserve the manual
This manual, the original copy of the declaration of conformity and all the technical annexes must be stored with care for the entire
lifespan of the machine, including the disassembly phase.
3.4.2 Where to store the manual
The manual should be kept in a dry place near the machine and must in any case always be available for consultation by the staff in
charge of running and monitoring the machine.
3.4.3 How to reproduce the manual
This manual can be photocopied only from the original copy, given that photocopies made from other copies will decrease the clarity
of the images and therefore of the information.
PROHIBITION!: Reproducing this manual is permitted only for the purpose of making a spare copy.
In compliance with the law, ELETTROLASER S.R.L. reserves ownership of this manual, prohibiting its transfer to third parties
and/or its unauthorized reproduction.
3.4.4 What to do in the event of loss or damage
If this manual is damaged or lost, the Client can ask for a certified copy. When forwarding the request, please indicate the code and
version of the manual. This data can be found at the top of each page (Fig. 3-1).
code: UMS012 revisew: 0.2 date: 20/04/2022
Fig. 3-1 - Manual ID data
3.4.5 What to do if ownership of the machine is transferred
If the machine is sold to a third party, the manual must be delivered to the new owner.
3.4.6 What to do in the event of changes to the machine
Before making any changes to the machine, contact the manufacturer or the dealer in order to receive the necessary clarifications
on feasibility of the operations without altering the machine characteristics or safety conditions.
If substantial changes are made to the machine or its control units, the machine certification and consequently this manual
will no
longer be considered valid .