background image

PRODUCT LINE GRAPH

CAUTION:

IMPORTANT:

Read the entire instrution manual before you start installation and assembly. 

If you have any questions regarding any of the instructions or warnings, Please 
contact at         

[email protected]

 for assistance.  

Use with products heavier than the rated weights indicated may result in 

instability causing possible injury.

Ensure that you have received all parts according to the component checklist prior to 

installation. If any parts are received damaged or defective, please contact us at 

[email protected]

. We are happy to replace parts to ensure you have a fully 

functioning product.

• Mounts must be attached as specified in assembly instructions. Improper installation 

may result in damage or serious personal injury.

• Safety gear and proper tools must be used. This product should only be installed by 

professionals.

• Make sure that the supporting surface will safely support the combined weight of the 

equipment and all attached hardware and components.

• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.

• This product contains small items that could be a choking hazard if swallowed. Keep 

these items away from children.

• This procuct is intended for indoor use only. Using this product outdoors could lead to 

product failure and personal injury.

±180°

±180°

±180°

±90°

min10~max85mm

min154~max404mm

170mm

61mm

min258~max300mm

min10~max85mm

+45°

-45°

75mm 100mm 115mm

75mm

100mm

115mm

01

Summary of Contents for ELTGM01-1













Reviews: