Installation
Explanation of functions
GB-5
GB-6
GB
Note:
Radio stations transmitting in the same frequency range
may cause reception interference.
Please note that the operating range of the radio signal is
limited by legislation as well as by the product design
Wall holder installation
• Before installing the wall holder, always ensure that the
transmitter and receiver are in proper working order.
• Mount the holder onto the wall using the two raw plugs and
screws provided.
Transmission control light
The transmission control light is illuminated when a radio
signal is being transmitted.
The transmission control light will flash during transmission if
battery power is low.
The transmission power or radio operating range will decrease
as battery power decreases. If the transmission control light
does not light up when the buttons are pressed, the batteries
must be replaced.
Group control
Group control refers to the operation of one or more receivers
at the same time. The group selected is controlled via a control
command.
The VarioTel is used to operate groups via five radio channels.
Select
button
The
Select
button may be used to select and programme up to
5 channels. The LED lights for the different channels light up to
indicate when a given channel is being used.
An additional channel is reserved for central command control.
This is allocated automatically. When the central command is
active, all five LEDs light up.
Note:
The inlay card beneath the transparent cover can be
used to make a note of the groups which have been
programmed.