Ⓒ
elero GmbH
EN | 15
2.8.3 Setting sun threshold
(encoding switch 1)
Important:
During active setting mode, the encoding switch
1
must be
set to "
ON
" and the other encoding switches must be set to
"
OFF
".
Encoding switch setting for the setting mode
1 2 3 4
ON
OFF
X
X X X
Upper position (
ON
):
Setting mode sun on
Encoding
switch 1:
ON
Switches 2 to 4
OFF
The sun threshold controller is pre-set to position 7 in the
factory. It can be set with the enclosed screwdriver from
"very cloudy" (position 1) to "direct solar radiation" (posi-
tion 15).
Position 0 deactivates the sun protection function.
Sun thresholds
Level 0
The light function is switched o
ff
Level 1
Moving down the roller shutter
when there is little light already
Level 7
Factory settings
Level 15
Moving down the roller shutter
only when there is lots of light
