2.3 On cleaning
●
When MarsCat or the charging station is soiled with small particles and dust, gently wipe them off with a dry, soft
cloth.
●
Do not use any volatile agent, such as alcohol or paint thinner, to avoid damaging the surface.
●
If residues of dust or fingerprints are found on MarsCat’s camera or sensor covers, do not touch them with bare
hands. Instead, blow them off with a commercially available blower or wipe them off with a soft cloth.
2.4 Moisture condensation
●
If MarsCat is brought directly from a cold place to a warm place, moisture may condense inside or on the surface
of it and cause a malfunction of MarsCat.
●
If moisture condensation has occurred, leave MarsCat without turning on the power. Turn on the power until
moisture condensation leave or you can wipe MarsCat with a dry cloth.
2.5 Heat generation
●
MarsCat and the supplied power adapter may generate heat while they are in use. Heat generation is caused by
the operation of internal electric circuits or the electric current that flows during battery charge and does not
indicate a malfunction.
●
The amount of heat generated by MarsCat depends on its activity.
●
When MarsCat or the supplied power adapter is extremely hot to the touch when compared to its usual state,
unplug the charger and stop charging.
2.6 On handling the charging station
●
To let MarsCat charge its battery on its own on the charging station (self-charging) and get up from there, do not
place objects, which may disturb MarsCat’s activities, around the charging station.
●
Choose an open bright place without direct sunlight to place the charging station and avoid a place subject to high
room temperatures of 35 °C (95 °F) and higher.
●
Do not touch the charge connector with bare hands to avoid causing a bad contact.
●
Do not exert force on the charging station, for example, step on or kick the charging station.
●
Do not allow the charging station to be exposed to water or spill any type of liquids.
2.7 On charging the battery of MarsCat
●
The supplied battery model is INR18650MJ1-2S2P, exclusively designed for MarsCat. If you need to purchase a
new one, please visit our official website:
https://www.elephantrobotics.com/.
●
Charge the battery under the condition where the ambient temperature is within the range from 5 °C to 35 °C (41
°F to 95 °F). If the temperature is out of this range, the battery may not be fully charged.
●
While you are charging the battery or using MarsCat, MarsCat’s body temperature may rise. This does not indicate
a malfunction of MarsCat.
●
Even if you do not intend to use MarsCat for an extended period of time, charge the battery every 3-6 months to
keep it from deteriorating.
●
If MarsCat has not been used for an extended period of time, it may take more time to charge the battery.
2.8 On Handling the Power Adaptor
●
Elephant Robotics provide supplied power adapter consistent with buyers’ location
●
Use the supplied power adapter with the charging station. Use of any power adapter other than the supplied one
will cause a malfunction of MarsCat.
●
For connecting the power adapter to a power outlet that is easy to access.
●
Any problem happens during charging, immediately unplug the power cord from the power outlet to cut the power
supply.
●
To avoid the risk of heat generation or a malfunction of the adapter, unplug the power cord from the power outlet
after the charging is completed.
●
The supplied power adaptor is exclusively designed for MarsCat’s charging station. It should not be used with any
other electric devices.
●
To purchase a new one, please visit our official website:
https://www.elephantrobotics.com/
.
2.9 On handling the SD card
●
Do not take SD card out.
●
If you want to read or transfer data, please use USB access to the file. For details, please visit our official website
to consult relevant information:
https://www.elephantrobotics.com/
.
2.10 On data compensation
●
In the event that your data is not recorded and thus unavailable for retrieval due to some reasons, such as a
malfunction of MarsCat or a communication error, please be advised that Elephant Robotics assumes no liability
for compensating lost data.
3. Network
●
To protect user privacy, the use of MarsCat does not require a network.
●
Users can operate MarsCat offline.
4. MarsApp
●
MarsAPP is available for MarsCat via Bluetooth. MarsApp is a software developed for MarCat. Through MarsApp,
you can better interact with MarsCat and learn more about it.
●
For download or update MarsAPP, it can be done by your phone. By updating the system software, you can add
new features to MarCat, improve user experience of MarCat, and enhance security of MarCat. Please use the
dedicated app, MarsApp, to keep your MarCat updated.
●
For the detailed introduction and use of MarsAPP, please refer to the User Guide on the official website.
- 06 -
- 07 -