-6-
PRACTICE
If you are unfamiliar with soldering surface mount components, it
would help to practice a bit before starting the assembly process. Six
0 ohm resistors, marked (000), are supplied with the SM-200K kit.
Only two are used in the assembly process. The other four may be
used for practice. Use the PC board area shown in Figure 5. If you
have not already done so, read the soldering tips in the previous
section. Try both of the methods described to see which you prefer.
SOLDER RESISTORS AND CAPACITORS TO PC BOARD
Be sure to read the section on soldering tips. Then follow the step by step instructions below. As each step is
completed, place a check mark in the box next to the instruction.
R4 - 56k
Ω
Resistor
(563)
R3 - 100k
Ω
Resistor
(104)
R5 - 10k
Ω
Resistor
(103)
C2 - .0039
μ
F Capacitor
(value marked on bag)
J1 - 0
Ω
Resistor
J2 - 0
Ω
Resistor
(000)
C1 - .015
μ
F Capacitor
(value marked on bag)
R2 - 1.5M
Ω
Resistor
R6 - 1.5M
Ω
Resistor
(155/1504)
R7 - 470
Ω
Resistor
R8 - 470
Ω
Resistor
(471)
R1 - 15k
Ω
Resistor
(153/1502)
0
Ω
Resistors
Figure 5
