44
Installation Procedures
Carefully complete the electrical connections.
Check connections before operation.
Reset
Press “ ” to flip down the panel.
Then press the Reset hole with a
pointed object to reset the unit to
restore the system to the original
factory settings.
Installation Opening
This unit can be installed in any
dashboard with a suitable 183mm
(W) x 52mm (H) opening as shown
on the left. The dashboard should
be 4.75mm - 5.56mm thick in order
to be able to support the unit.
1) Insert the mounting collar into the dashboard, and bend the mounting
tabs out a screwdriver. Make sure that lock lever is flush with the mount-
ing collar (not projecting outward)
1a)IMPORTANT: Remove these two screws
before installation. Otherwise, the DVD
Player will not work.
2) Secure the rear of the unit.
After fixing mounting bolt and
power connector, fix the rear of the
unit to the car body with the sup-
plied rubber cushion.
3) Insert trim plate.
INSTALLATION GUIDE
Summary of Contents for MX-390 DVD
