Elenberg MC-4080, User Manual

Page: 9 / 80

9
System Setup
MENU OPERATION:
Press SETUP key, screen show setup page. In setup mode, press SETUP
key again to quit the setup page. Press direction key to the desired item,
press ENTER to confirm.
(1) Some setup items are concerning the present modes. The items in gray
can't be set up.
(2) The setup is memorized and kept after power off.
GENERAL SETUP PAGE:
• TV Display
Normal/PS: When the unit connects to the normal TV set, the wide-
screen image shows on the full screen, but some part is cut off.
Normal/LB: When the unit connects to the normal TV set, the wide-
screen image shows and black bars appear on the top and bottom of
screen.
Wide-screen: Use this item when the unit is connected to the wide-
screen TV set.
• ANGLE MARK
It will show the ANGLE mark when playing DVD disc with multi-angle view
if selecting ON
• OSD LANG
Select on-screen display language
• SPDIF OUTPUT
SPDIF OFF: no digital signal out (optical or coaxial output off ), only
analog audio output.
SPDIF/RAW: digital signal output in the original format recorded in the
disc.
SPDIF/PCM: digital signal output in the decoded PCM form.
• CAPTIONS
This function doesn't work when the disc without caption. If the caption is
OFF, press SUBTITLE key on the remote controller to make caption on.
The default setup is CAPTION ON.
• SCREEN SAVER
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen, and
the unit will go to standby mode after 20 minutes. You can press STANDBY
key on the remote controller to wake it up.