Elenberg HT-410, User Manual

Page: 26 / 36

26
Press SETUP key, screen show setup page. In setup mode, press SETUP
key again to quit the setup page. Press arrow button to the desired
item, press ENTER to confirm.
(1) Some setup items are concerning the present modes. The items in
gray can’t be setup.
(2) The setup is memorized and kept after power off.
GENERAL SETUP PAGE
TV Display
4:3 Panscan: When the unit connects to the normal TV set, the
wide-screen image shows on the full screen, but some part is cut
off.
4:3 Letterbox: When the unit connects to the normal TV set, the
wide-screen image shows and black bars appear on the top and
bottom of screen.
16:9 Wide Screen: Use this item when the unit is connected with
the wide screen TV set.
Wide Squeeze: Use this item when the unit is connected with the
wide screen TV set
ANGLE MARK
It will show the ANGLE mark when playing DVD disc with multi-
angle view if selecting ON
OSD LANGUAGE
Select on-screen display language
CAPTIONS
This function doesn’t work when the disc without caption. If the
caption is OFF, press SUBTITLE key on the remote controller to
make caption on. The default setup is CAPTIONON.
SCREEN SAVER
If the SCREEN SAVER is set ON and the unit is switched on without
a disc playing for several minutes, a moving picture appears on
the screen, and the unit will go to standby mode after 20 minutes.
You can press STANDBY key on the remote controller to wake it
up.
LAST MEMORY
When this function is on, the unit can memorize the time elapsed
from the last time you played the disc. Then at the next playing, it
will resume playing from the memorized time.
AUDIO SETUP
ANALOG AUDIO SETUP
LT/RT: The audio out is Left and Right channels format even if the
SYSTEM SETUP