Elenberg DW-9001, Instruction Manual

Page: 40 / 41

40
Dishes and
flatware
not clean
Improper program Select stronger program
Improper rack loading Make sure that the action of the de-
tergent dispenser and spray arms are
not blocked by large dishware.
Spots and
filming on
glasses and
flatware
1 Extremely hard water
2 Low inlet temperature
3 Overloading the dishwasher
4 Improper loading
5 Old or damp powder deter-
gent
6 Empty rinse agent dispenser
7 Incorrect dosage of deter-
gent
To remove spots from glassware:
1 Take out all metal utensils out of
the dishwasher.
2 Do not add detergent.
3 Choose the longest cycle.
4 Start the dishwasher and allow it to
run for about 18 to 22 minutes, then
it will be in the main wash.
5 Open the door to pour 2 cups of
white vinegar into the bottom of the
dishwasher.
6 Close the door and let the dish-
washer complete the cycle. If the vin-
egar does not work: Repeat as above,
except use 1/4 cup (60 ml)of citric
acid crystals instead of vinegar.
Cloudiness
on
Combination of soft water and
too much detergent
Use less detergent if you have soft
water and select a shortest cycle to
wash the glassware and to get them
clean.
Yellow or
brown film
on inside
surfaces
Tea or coffee stains Using a solution of 1/2 cup of bleach
and 3 cups warm water to remove the
stains by hand.
WARNING
You have to wait for 20 minutes af-
ter a cycle to let the heating elements
cool down before cleaning interior;
otherwise, burns will happen.
Iron deposits in water can
cause an overall film
You have to call a water softener
company for a special filter.
White film
on inside
surface
Hard water minerals To clean the interior, use a damp
sponge with dishwasher detergent
and wear rubber gloves. Never use
any other cleaner than dishwasher
detergent for the risk of foaming or
suds
Detergent
cup lid won’t
latch
Dial is not in the OFF position Turn the Dial to OFF position and
slide the door latch to the left.
Detergent
left in dis-
penser cups
Dishes block detergent cups Re-loading the dishes properly.