6
Chapter 5
I N S T A L L A T I O N M A N U A L |
5
CONNECTION
5�1
ELECTRICAL
This appliance must only be connected to a 230/240 Volts AC 50Hz
supply. Before connecting the fire, check that the supply voltage is the
same as stated on the fire.
It is important that the outlet is located outside the installation location
so that the socket is easily accessible and the plug can be disconnected
from the stove after installation.
After the fire is attached to the wall and connected to the socket, the
surround (the chimney) can be placed around it.
This appliance must only be used on a AC supply, fuse rating 13Amp. The
wires in the mains lead are coloured in accordance with a standard UK
supply, these being:
•
GREEN/YELLOW – EARTH
•
BLUE – NEUTRAL
•
BROWN – LIVE
As the colours of the mains lead of this appliance may not match the
coloured markings used to identify the terminals in a plug, please
observe the following
•
The green and yellow wire must be connected to the terminal in the
plug which is marked with the letter E or Earth symbol.
•
The blue wire must be connected to the terminal in the plug which
is marked with the letter N.
•
The brown wire must be connected to the terminal in the plug
marked with the letter L.
•
Replace fuses only with fuses of the correct size and rating.
Figure 5.1 |
Posi tion of main power supply at the back
Figure 5.2 |
Posi tion of the On/Off swi tch
5�2
MAINTENANCE
Maintenance to this device may only be done by a qualified professional.
It is adviced to maintain your fire at least once every 12 months.
WARNING:
Before repaires or maintenance check whether the fire is unplugged.
CAUTION
In order to avoid a hazard due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
Your main power supply is attached to the IEC through the back of the
fire, see
Figure 5.1
.
The on/off switch to activate connection to your app or E-Tab is located
at the front of the fire, in the gap between the front glass panel and the
bottom edge of the frame, offset to the right hand side.
Figure 5.2
