V4.0
Element14 | element14.com/PiDesktop
11
filesystem. You will be asked to select the SSD or USB drive. Select the connected
SSD or USB drive and then click “Start”.
Once completed, you will be asked for confirmation that you want to change the
filesystem to SSD. Make sure the "SD Card copier" has executed correctly. If it has,
select yes (‘y’) to confirm booting your PiDesktop directly from the SSD, otherwise
select no (‘n’).
You will now be asked to reboot your system to implement the new configuration
and put it into effect.
Once you have successfully rebooted your system, continue with the following
steps:
Step 1:
Run ppp-hdclone to call the SD Card Copier. DO NOT use ‘sudo’ forward in
the new Raspbian image. Select both the source device and the destination device
from the drop down lists provided.
Step 2:
Make sure your destination USB device contains no useful data, as
anything currently on your USB device will be erased.