RW-337D Service Manual I Page 19 of 61
1)
Remove the two screws (ST2.6x4) shown in the
figure with cross screwdriver and take off the
press plate of paper near end sensor;
2)
Take off the horizontal/vertical paper near end
sensor holders in the arrow direction shown in
the figure.
1)
Take off the paper roll guide with a moderate
force in the arrow direction shown in the figure;
2)
Take off the paper near end sensor adjustment
lever in the arrow direction shown in the figure.
Take off the paper roll shaft in the arrow direction
shown in the figure.
Remove the three screws (ST2.9x6) shown in the figure
with cross screwdriver and take off the right side plate
of paper cabinet.
